Stud anchor B
- Material: Steel
- Surface: Zinc plated
Exclusively for trade customers
- Price display and ordering for customers after registration
- Register now and access more than 50,000 products
- Metric thread with hexagon nut
- Can be loaded immediately after installation
- High load-bearing capacities, small edge distances
- Fire resistance class F30, F60, F90 and F120 (M8-M16)
The permissible values for tensile load under fire load can be found in the approval.
Stud anchor B is suitable for single fixing in the medium- and heavy-load range: Anchorage with European Technical Approval in non-cracked concrete (compression zone).
For this reason, the following applies to fixings with stud anchor B:
The anchor has European Technical Approval for anchorage in reinforced or unreinforced standard concrete with a strength class of min. C20/25 and max. C50/60 in accordance with EN 206:2000-12
For use in concrete C20/25 and pressure-resistant natural stone (approval)
Stud anchor B may only be used in dry indoor room conditions
Suitable for anchorages with predominantly static loads (e.g. tare weight, fittings, stored materials) or quasi-static loads (e. g. façade constructions, railings)
Suitable for fastening metal structures, metal profiles, brackets, base plates, supports, cable trays, pipes, wooden structures, beams, purlins etc.
Push-through installation
Make the drill hole through the attachment part
Clean the drill hole
Knock in stud anchor B with a hammer or machine setting tool
For final anchoring, apply torque with torque wrench
Installation must be carried out in accordance with the approval certificate!
Proofs of performance:
- Material: Steel
- Surface: Zinc plated
