Insulating plate/insulation anchor, plastic


  • Material: PP - Polypropylene
  • Nominal diameter: 10 mm
  • Disc diameter: 60 mm
  • Head diameter: 60 mm
  • Anchoring depth (h nom): 25 mm
  • Drill hole diameter: 10 mm
  • Drill hole depth: 30 mm

$('#scrollbtn').click(function () { document.querySelector('.nav-tabs li:first-child a').click(); $('html, body').animate({ scrollTop: $('.nav-tabs').offset().top - 250 }, 1000); });
* Incl. VAT excl. Shipping


Detailed values and calculations with safety factor can be found in the approval certificate.

The insulating plate/insulation anchor is suitable for securing non-self-supporting insulation (e.g. mineral fibreboard or glass wool), hard, self-supporting insulation (e.g. polystyrene or hard foam panels), rear-ventilated cladding, films and sealing films in basement applications (outside).
The insulating plate/insulation anchor can be used in the following substrates:
Concrete
Light concrete
Solid brick
Hollow bricks

Push-through installation
Create and clean the drill hole through the insulating plate
Knock the insulation holder sleeve through the insulating plate with a hammer
Hammer in expansion nail
The retaining plate must rest completely on the insulating plate.
Installation must be carried out in accordance with the approval certificate!

  • Material: PP - Polypropylene
  • Nominal diameter: 10 mm
  • Disc diameter: 60 mm
  • Head diameter: 60 mm
  • Anchoring depth (h nom): 25 mm
  • Drill hole diameter: 10 mm
  • Drill hole depth: 30 mm